crazy toy 2 claw crane machine

crazy toy 2 claw crane machine details as below

How to set crazy toy 2 claw crane machine ?

Improvements from the older versions of Claw Machine

1. Improvised Power Box

The Power Box is separated from the system’s Functional Port to allow for

systematic wiring.

1. Comprehensive indication features

Each switch has a corresponding indication light to facilitate

troubleshooting and repair.

1. Powerful processor

High capacity processor enables customizable functions and features.

1. Proper functional testing

Ensures easy assembling and troubleshooting.

1. Automatic Claw Grip Adjustment and Manual Claw Grip Adjustment

Smoothens management process and minimalizes human interaction

1. Remote viewing and controlling via Mobile Application

Enables adjustment of Claw Machine settings remotely.

1. Claw Machine Installation Procedure
2. It is advisable to complete reading the Instruction Manual before

assembling the Claw Machine.

1. Connect the Power Cord to the Controller Port. You may identify the

Controller Port by matching the Power Cord’s profile to the Controller Port.

Subsequently, connect the claw’s function cable and motor cable.

1. Connect the Claw Machine to an electrical source, switch on the Claw

Machine and enter into the settings interface and select “Claw Testing”

mode.

1. After entering “Claw Testing” mode, check that all cable connections are

correctly done via moving the claw leftwards and rightwards. If otherwise,

please recheck your cable connections.

1. Connect your Functional Port. The machine will provide instructions and

error messages to facilitate your connection troubleshooting.

1. Enter into Settings mode. Turn on “Warm Up Machine” function. Exit

Settings mode and allow Claw Machine to warm up. The Claw Machine

will startup automatically. You may analyze the data shown to ensure

stability of the Claw Machine.

1. Customization of features and functions will be adjusted based on

Customers’ specification and handed over accordingly

Machine Fault and Repair

Upward & Downward Error: First, check if the movement direction is correct.

When it move upwards, Indication Light L1 should light up. When it move

downwards, Indication Light L2 should light up. Secondly, check if the ropes are

being tangled up. Ensure that Indication Light DS1 and Indication Light DS2

lights up as you move up and down.

Leftward & Rightward Error: First, check if the movement direction is correct.

When it move leftwards, Indication Light L6 should light up. When it move

rightwards, Indication Light L7 should light up. Secondly, check if the ropes are

being tangled up. Ensure that Indication Light DS3 light up as you to the left.

Frontward & Backward Error: First, check if the movement direction is correct.

When it move frontward, Indication Light L4 should light up. When it move

backward, Indication Light L5 should light up. Secondly, check if the ropes are

being tangled up. Ensure that Indication Light DS4 light up as you to the front,

and Indication Light DS5 light up as you move to the back.

Coin receiver Error: If you have two coins receiver, ensure that the setting for

both receivers are on. Refer to DS14 and ensure it lights up when you insert the

coins.

Anti-shake Error: Check if the floor surface is flat, or if the machine is slanting.

Refer to DS15.Sensor Light Error: Refer to where the light points to (sensor) and refer to DS16

to adjust sensitivity of sensor.